Now the continuous release of commodities can make all kinds of cleaning machines and equipment widely used. For semiconductor components and other vulnerable parts and printed circuit boards with complex surfaces, the surface stains can not be removed. According to the operation of the cleaning machine on the separate processing chip and the basic principle of ultrasonic cleaning, Master the whole operation process of the hanging chain ultrasonic cleaning line, set the technical full-automatic frequency tracking characteristic impedance of ultrasonic cleaning in the control loop, and carry out the design method of the system in detail.

现如今的电镀行业超声波清洗机，可以实行全自动頻率追踪输出功率调节和同歩，并有二种实际操作方式扫描仪和震荡，试验说明清洗机工作中靠谱清洗效果非常的好，根据清洗和诊疗机不一样浓度的饱和溶液的多酶清洗设备的清洗机的具体分析中，发觉因而酶的浓度适度的清洗，进而保证清洗器材的品质。

Nowadays, ultrasonic cleaning machines in electroplating industry can implement full-automatic frequency tracking, output power adjustment and synchronization, and there are two practical operation modes: scanner and vibration. The test shows that the cleaning effect of the cleaning machine is very good. According to the specific analysis of the cleaning machine of multi enzyme cleaning equipment with different concentration of saturated solution between the cleaning machine and the diagnosis and treatment machine, It is found that the concentration of enzyme is appropriate for cleaning, so as to ensure the quality of cleaning equipment.

挑选受破坏的机器设备，任意分为3组，运用一个设备超声波清洗，各自提前准备多种多样酶的浓度来清洗被破坏的机器设备，应用高倍放大镜看着查验、来检验实验棒的清洗、3M为测试设备表面残余的蛋白，分辨清洗品质双光透镜溶清洗液多酶的实验，浓度的看着定期检查检测棒3M清洗的达标率是显着比基浓度更强，2组中间存有统计学意义。

Select the damaged machinery and equipment and randomly divide them into three groups. Use one equipment for ultrasonic cleaning. Prepare a variety of enzyme concentrations in advance to clean the damaged machinery and equipment. Use a high-power magnifying glass to check the cleaning of the experimental rod. 3M is to test the residual protein on the surface of the equipment and distinguish the cleaning quality. The experiment of multiple enzymes in the cleaning solution of double light lens, The standard rate of 3M cleaning of the detection rod was significantly stronger than the base concentration, and there was statistical significance between the two groups.

电子零件超声波清洗机，用以清洗环境污染的机器设备，提升清洗实际效果，确保品质，设计方案了清洗品质、紧凑清洗新式清洗机的金属材料线框，应用倒丝机设备用以清洗在清洗箱不断清洗，可提升清洗的时间部分，循环和设定，以保证清洗液的清洗和环境温度的清洗液的自动控制系统，因而超声波頻率和输出功率是依据污染物质的粒度来确认的。

The ultrasonic cleaning machine for electronic parts is used to clean the machinery and equipment polluted by the environment, improve the actual cleaning effect and ensure the sterilization quality. The design scheme has the cleaning quality and compact cleaning of the metal material wireframe of the new cleaning machine. The equipment of wire pouring machine is used to clean the continuous cleaning in the cleaning box, which can improve the cleaning time, cycle and setting, In order to ensure the cleaning of cleaning solution and the automatic control system of cleaning solution of ambient temperature, therefore, the ultrasonic frequency and output power are confirmed according to the particle size of pollutants.