机箱机柜连接可以采用哪些方法？_客户见证

当前位置：首页- 新闻中心 > 客户见证

新闻中心

热门产品

常见问题

新闻中心

机箱机柜连接可以采用哪些方法？

发布时间：2021-07-23 来源：//www.aqfitlab.com/ 浏览量：

1、焊接

1. Welding

是对焊件的连接的工艺方法，可分为：手工电弧焊、气体保护电弧焊、激光焊、段焊和接触焊，我司主要采用气体保护电弧焊。

It is a process method for permanent connection of weldments, which can be divided into manual arc welding, gas shielded arc welding, laser welding, segment welding and contact welding. Our company mainly adopts gas shielded arc welding.

在进体保护电弧焊时，电极电弧区及焊接熔池处在保护气体的保护下，采用氩气保护焊缝表面梅雨氧化物及夹杂物。可以在任何空间位置施焊，可以用肉眼观察焊接的成形过程并进行调整生产效率高。

During gas shielded arc welding, the electrode arc area and welding pool are under the protection of shielding gas, and argon is used to protect Meiyu oxides and inclusions on the weld surface. It can be welded at any spatial position, and the forming process of welding can be observed and adjusted with naked eyes, with high production efficiency.
济南机箱机柜

2、接触焊

2. Contact welding

接触焊时瞬时加热连接部位子熔化状态或非熔化状态下对被焊件加压形成焊接接头的焊接方法，它可分为对焊、点焊和缝焊。

In contact welding, the welding method of pressing the welded part to form a welded joint under the melting state or non melting state of the connecting part, which can be divided into butt welding, spot welding and seam welding.

3、螺纹联接

3. Screw connection

螺纹联接局域安装容易、拆卸方便、操作简单等优点，常用于可拆的钢结构连接，它可分为螺钉联接合螺栓联接。

Screw connection has the advantages of easy installation, easy disassembly and simple operation. It is commonly used in detachable steel structure connection, which can be divided into screw connection and bolt connection.

4、铆接

4. Riveting

铆接是用铆钉将金属结构的零件或组合件连接子,一起1的方法，铆钉种类较多，我们常用的铆钉有封闭形圆头抽芯铆钉、封闭形沉头抽芯铆钉及开口型圆头抽芯铆钉、开口型沉头抽芯铆钉。

Riveting is a method of connecting parts or assemblies of metal structure with rivets. There are many kinds of rivets. Our commonly used rivets include closed round head blind rivets, closed countersunk head blind rivets, open round head blind rivets and open countersunk head blind rivets.

上一篇：低压抽屉柜使用时对环境温度的要求？

下一篇：半岛电竞中国总部地址电话和威图机柜有哪些区别？

热门产品 / HOT PRODUCT

Blokset 5000 开关

UPS电源柜

电源柜

新闻 / NEWS RECOMMENDATIONS