The quality problems of complete set distribution cabinet installation are often ignored by many workers. Due to the improper treatment of these problems, it has brought a lot of trouble to the actual work.

首先我们来分析一下常产生的一些质量问题，主要有以下几点：

First, let's analyze some common quality problems, mainly including the following:

基础型钢焊接处焊渣清理不净，除锈不干净，油漆刷不均匀，有漏刷现象。

The welding slag at the welding position of foundation section steel is not cleaned, the rust removal is not clean, the paint brush is uneven, and there is a phenomenon of missing brush.

柜（盘）内，电器元件、瓷件油漆损坏。

In the cabinet (panel), the paint of electrical components and porcelain parts is damaged.

柜（盘）内控制线压接不紧，接线错误。

The control line in the cabinet (panel) is not crimped tightly and the wiring is wrong.

手车式柜二次小线回路辅助开关切换失灵，机械性能差。

The auxiliary switch of secondary small line circuit of handcart cabinet fails to switch, and the mechanical performance is poor.

根据以上存在的问题我们应该采取相应的措施：

According to the above problems, we should take corresponding measures:

提高质量意识，加强作业者责任心，做好工序搭接和自、互检检查。

Improve quality awareness, strengthen the sense of responsibility of operators, and do a good job in process overlapping, self inspection and mutual inspection.

加强责任心，保护措施具体。

Strengthen the sense of responsibility and take specific protective measures.

加强技术学习，提高技术素质。加强学习，提高工作责任心

Strengthen technical learning and improve technical quality. Strengthen learning and improve the sense of responsibility